About Inverter Plasma Cutting : 
Inverter plasma cutting is also known as "Air Plasma Cutting". Plasma cutting is a process that cuts electrically conductive materials by means of an accelerated jet of hot plasma arc. Typical materials cut with a plasma torch include steel, stainless steel, aluminum, brass and copper. It can be used manual by hand or attaching plasma torch to CNC positioned for automatic cutting.
| Technical Specifications:- | ||
| Item | Unit | IPC 60 |
| Supply | HZ | 415,3-Ph, 50/60Hz |
| Load | KVA | 9.6 |
| Power Factor | CosØ | 0.99 |
| Insulation | Class | F |
| Output Volt | Volt | 320 |
| Mix Current | Ampere | 30 |
| Max Current | Ampere | 60 |
| Cutting Depth MS | mm | 3-15 |
| Cutting Depth SS | mm | 3-15 |
| Duty Cycle | % | 60 |
| Control Type | Type | Digital |
| IP | Class | 21 |
| Weight | Kg | 42 |
| Dimension | LXWXH(cm) | 60x33x53 |
| Technical Specifications:- | ||
| Item | Unit | IPC 100 |
| Supply | HZ | 415,3-Ph, 50/60Hz |
| Load | KVA | 15.5 |
| Power Factor | CosØ | 0.99 |
| Insulation | Class | F |
| Output Volt | Volt | 320 |
| Mix Current | Ampere | 50 |
| Max Current | Ampere | 100 |
| Cutting Depth MS | mm | 5-25 |
| Cutting Depth SS | mm | 5-25 |
| Duty Cycle | % | 60 |
| Control Type | Type | Digital |
| IP | Class | 21 |
| Weight | Kg | 46 |
| Dimension | LXWXH(cm) | 60x33x53 |
| Technical Specifications:- | ||
| Item | Unit | IPC 150 |
| Supply | HZ | 415,3-Ph, 50/60Hz |
| Load | KVA | 25 |
| Power Factor | CosØ | 0.99 |
| Insulation | Class | F |
| Output Volt | Volt | 320 |
| Mix Current | Ampere | 75 |
| Max Current | Ampere | 150 |
| Cutting Depth MS | mm | 10-40 |
| Cutting Depth SS | mm | 10-40 |
| Duty Cycle | % | 60 |
| Control Type | Type | Digital |
| IP | Class | 21 |
| Weight | Kg | 55 |
| Dimension | LXWXH(cm) | 70x36x53 |
Synonym :Air Plasma Cutting Machine, SS Cutting Machine, Stainless Steel Cutting Machine.
